Brother PR-620 Tips And Techniques page 6

Hide thumbs Also See for PR-620:

Tips and Techniques on the PR-620

Hooping the fabric in the embroidery frame

Select an embroidery hoop to use. Be sure to use an

appropriate size frame for the size of embroidery that you

will be doing. If the embroidery frame that is used

is too large, the pattern may be misaligned or the

fabric may pucker.

1. Loosen the screw on the outer frame.

2. Place the fabric with the right side up on top of

the outer frame.

3. Press the inner frame onto the outer

frame. Be sure there are no wrinkles in

the fabric after it is streched in the

embroidery frame.

4. Lightly tighten the screw, and then pull the

edges of the fabric.

5. Securely tighten the screw, and then check that

the fabric is taut.