Calls Via Bluetooth; Interruption Of The Connection; Playing Music Back Using The Cable - Silvercrest SKBT 3 A1 Operating Instructions Manual

5. Now play back a music track on the au-
dio device. The sound is played by the
headphones.
6. Use the 19,
18 buttons to select and con-
trol the music track.
5.4

Calls via Bluetooth

If the device is connected to a smartphone it
is possible for you to accept phone calls. The
ring tone is reproduced via the headphones
and the music playback is interrupted.
NOTES:
• For some mobile phones you have to
choose Bluetooth as audio source when
accepting a call.
• It is possible, that not all of the functions
will be supported by all mobile phones.
1. Press the button
accept the call.
2. Adjust the volume during the phone call
using the buttons
21.
3. Press the button
ing the phone call to end the call. If you
have accepted the call while the music
was playing, the song will continue to
be played after ending the phone call.
5.5 Interruption of the
connection
The connection is interrupted if ...
... one of the devices is switched off;
... the Bluetooth function is switched off;
... the range (approx. 10 metres) is ex-
ceeded;
... you press the button
LED 6 flashes. In this case, a new
connection to another device can be
established immediately.
5.6
21 and
NOTE: a playback via a cable, this connec-
tion has priority over the Bluetooth connec-
tion. A possibly existing Bluetooth
connection will be interrupted when the
jack 10 is plugged in.
18 briefly to
19 and
18 briefly dur-
1. The stereo jack cable 10 has 2 differ-
2. Switch on the audio device.
3. Start playback on the audio device. The
4. Use the button 12 at the jack cable 10
5 until the
10 GB
Playing music back
using the cable
Button
while playing back:
• press briefly: pause /
play
• press briefly 2x: next
song
• press briefly 3x: previous
Button 12 at
song
the jack ca-
• press long: start lan-
ble 10
guage assistant of a con-
nected smartphone
during a call:
• press briefly: pick up /
end call
• press long: reject call
ent jacks. Insert the 4-pole jack 13 into
the headphone socket of the sound
source (e.g. smartphone, MP3 player)
and the 3-pole jack 8 into the jack
socket 7 on the device.
sound is reproduced via the head-
phones.
to select and control the music track.
The volume is controlled via the audio
device.
Function