Pairing/Unpairing Headphones Via Speaker Box With A Bluetooth; Playback Device - Silvercrest SIKL 40 A1 Operating Instructions Manual

Note
► The next time you turn on the speaker box
automatically to the last-connected Bluetooth
If your Bluetooth
reconnect to the speaker box
connection manually. A detailed description of how to do this can
be found in the operating manual for your Bluetooth
device.
► If no Bluetooth
13 minutes, the speaker box
► If there is no playback within 10 minutes while the Bluetooth
nection is established, the Bluetooth
speaker box
cally after 3 minutes if no further action is taken.
► Make sure that the speaker box
away from the Bluetooth
are no barriers or electronic devices placed between them.
Pairing/unpairing headphones via speaker box
with a Bluetooth
Note
► Once a Bluetooth
speaker box
alternatively use the headphones
♦ Remove the headphones
them on as described in section Putting on the headphones.
Playback via the speaker box
headphones
♦ If you put the headphones
playback will continue through the speaker box
SIKL 40 A1
playback device does not automatically
®
connection can be established within
®
6
is in pairing mode again and switches off automati-
®
®

playback device

connection is established between the
®
6
and a Bluetooth
1
1
.
1
6
6
, you will have to re-establish the
6
switches off automatically.
connection is terminated. The
®
6
is no more than 10 metres
playback device. Make sure that there
playback device, you can
®
1
for playback via Bluetooth
from the speaker box
6
stops and is continued via the
back into the speaker box
, it will connect
playback device.
®
playback
®
6
and put
6
6
.
GB │ IE │
con-
®
.
®
17 ■