Mode Of Operation - Siemens LOGO! 8 Manual

4 Mode of operation

Mode of operation
4
This application example provides two versions of a LOGO! switching program with
the same function for the LOGO! Soft Comfort software.
In the basic switching program, only the four LOGO! integrated outputs are used
and navigated via the TDE. This reduced switching program simplifies the
understanding of the operating principle.
Up to 20 digital outputs are used in the extended switching program. This
corresponds to the maximum configuration of the control system, which allows up
to 20 functions to be switched in the building.
If you want to switch less functions, delete the unnecessary program parts from the
switching program, in line with Chapter
Note
You will find a function description of the corresponding circuit as a comment on
the switching program under LOGO! Soft Comfort:
> "File" > "Properties" > "Comment"
Hint: Select "Extras" > "Options" > "Print" and check the "Comment" box to print
the function description together with the program.
LOGO! 8 TDE Central control for individual switching of general consumers
Entry ID: 109755864, V1.0, 04/2018
4.2.5
11