Structure And Description; Components Used - Siemens LOGO! 8 Manual

2 Structure and description

Structure and description
2
2.1

Components used

This application example includes two extension levels for your project.
The basic example uses only the LOGO! basic unit, with 4 switchable outputs, and
is preferably used to illustrate the switching program. The simulation function of
LOGO! Soft Comfort is available for this purpose. You can expand this switching
program.
For the expanded example the maximum configuration with 20 switchable outputs
was configured for LOGO! The advantage for you is that you shorten the switching
program according to your application in line with Chapter 4.2.5.
The Application Example was created with the components from
Table 2-1: Hardware and software components for the application example
Component
LOGO! Soft
Comfort V8.2 DVD
LOGO! 230RCE
LOGO! TDE
Extensions
LOGO DM8 230R
LOGO DM16 230R
(1)
You can replace two identical DM8 expansion modules with one DM16 expansion module of the
same type (and vice versa) without changing the circuit program.
The components used are LOGO! 8 for 230V with the corresponding expansion
modules for 230V. The connection diagram and further indications can be seen in
Chapter 3.3.
However, you have the possibility to create other configurations, e.g. with 24V
Note
devices. Mixed operation, as described in Chapter 3.4, is also possible.
This application example consists of these instructions and two LOGO! switching
programs for 4 (basic device) and 20 (maximum configuration) digital outputs.
Table 2-2: Connectors for our application example
Component
Documentation
LOGO! 8
Programs
LOGO! 8 TDE Central control for individual switching of general consumers
Entry ID: 109755864, V1.0,
Number
1
1
1
Number
(1)
2
(1)
1
109755864_LOGO8_TDE-CentralControl-SwitchConsumers_en.docx
109755864_LOGO8_TDE-CentralControl-SwitchConsumers_en.ZIP
04/2018
Article number
6ED1058-0BA08-0YA1
6ED1052-1FB08-0BA0
6ED1055-4MH08-0BA0
Note concerning the maximum extension of
LOGO!
6ED1055-1FB00-0BA2
6ED1055-1FB10-0BA2
File name
Table 2-1 .
Note
You will find an upgrade
to V8.2 at:
https://www.siemens.com/gl
obal/en/home/products/auto
mation/systems/industrial/pl
c/logo.html
230V version with 4 relay
outputs
Optional components
4 relay outputs
8 relay outputs
Note
-
Requirement:
LOGO! Soft
Comfort V8.2
6