Advertisement
This service information is designed for experienced repair technicians only and is not designed for use by the
general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to
service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any
attempt to service or repair the product or products dealt with in this service information by anyone else could
result in serious injury or death.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Audio Input
[Analogue]
Selectable from 4 sources
Source 1/2:
Source 3/4:
[AES/EBU (Option)]
SMPTE279M 75 Ω (BNC)
Audio Output
[Analogue]
4 outputs (simultaneous)
Ch. 1/2:
Ch. 3/4:
[AES/EBU (Option)]
SMPTE279M 75 Ω (BNC)
Other Inputs/Outputs
LTC time code Input:
LTC time code output:
SCSI connector:
VTR control connector :
Jog Pad connector:
PC
CPU :
OS :
Main Memory :
Built-in Hard Disk Drive :
Floppy Disk Drive :
ZIP Drive :
CD-ROM Drive :
Card Slot :
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT SAFETY NOTICE
here are special components used in this equipment which are important for safety. These parts are indicated
T
by the " Y " mark on the schematic diagram and the replacement parts list. It is essential that these critical
parts should be replaced with manufacturer's specified parts to prevent X-radiation, shock, fire, or other hazards.
Do not modify the original design without permission of manufacture.
+4dBu, 0dBu, –20dBu selectable, Hi-Z balanced (3-pin XLR connector)
–6dBs, 20 kΩ, unbalanced (RCA pin jack)
+4dBu, 0dBu, –20dBu selectable, 47 Ω balanced (3-pin XLR connector)
–6dBs, 75 Ω, unbalanced (RCA pin jack)
x1 (BNC)
x1 (BNC)
x4 (Audio, Video 1, Video 2, Video 3, SCSI-2 standard,
68-pin half pitch connector, pin type)
RS-422, 9 pin x2 (D-sub)
9 pin x1 (D-sub)
Pentium Processor, MMX 200 MHz
Windows 95
32 MB DIMM 168-pin SDRAM
3.2 GB (E-IDE) x1
1.44MB x1
100MB x1
x32 Speed
PCI x3 (supplied by Panasonic only)
Y WARNING
This symbol warns the user that uninsulated voltage within
the unit may have sufficient magnitude to cause electric
shock. Therefore, it is dangerous to make any kind of contact
with any inside part of this unit.
This symbol alerts the user that important literature concerning
the operation and maintenance of this has been included.
Therefore, it should be read carefully in order to avoid
any problems.
Advertisement
