Related Manuals for Philips SpaceWise
Summary of Contents for Philips SpaceWise
- Page 1 Lighting Controls SpaceWise Quick start guide Wireless lighting control solutions from Philips for office and industrial applications...
- Page 2 SpaceWise remote I /II I /II 10% A 20% B 30% C 10% A 20% B 30% C 40% D 50% E 60% F 40% D 50% E 60% F 70% G 70% G Mode group group Send save save...
- Page 3 Table of contents Office applications Industrial applications Troubleshooting Frequently asked questions...
- Page 4 Optional wireless wall switch, scene selector and external ceiling sensors. Instructions: • Luminaire installation instructions (In luminaire box) • Accessory installation (In accessory box) Additional information can be found at www.philips.com/spacewise: • SpaceWise User Manual • SpaceWise Design Guide Philips Lighting Controls...
- Page 5 Plan luminaire wireless groups Group 1 Group 1 Group 2 When configuring open plan offices with the SpaceWise Remote, large groups of 30-50 luminaires are recommended to maintain the lighting aesthetics of the space. Smaller groups may turn off more frequently than desired.
- Page 6 Luminaire Luminaire Walk to the next Luminaire will dim luminaire to be down to 5%. added to the Luminaire group, point to the luminaire and press “add.” Repeat step for adding all the luminaires in the group. Philips Lighting Controls...
- Page 7 Close group Luminaire Luminaire Point to any of All the luminaires in the the luminaires group will go to 50% added in the light level. group and Luminaire press “close.” Verify the group Luminaire Luminaire Point to any of the All the luminaires in the luminaires in the group will turn...
- Page 8 Choose an application mode Choose the desired application mode per group. Behavior varies for each application. See the SpaceWise Design Guide for more details. Hold Prolong Application ON/OFF behavior Mode time time Open Office Auto ON/Auto OFF 10 min 15 min...
- Page 9 Set application mode Luminaire Luminaire Point to any of Red LED on the luminaires remote will in the group and start blinking. mode press “mode.” While the LED is still blinking red, enter the number for the preferred mode (see list at step 5). Point to any of The luminaire will O )))
- Page 10 100 h If unsure about light output selection, step up to the highest setting and observe the subtle reduction in light level each time you activate lower settings. zone link? mode? test 100 h link? mode? 10 Philips Lighting Controls zone...
- Page 11 Link a wireless switch to a group Up to 5 switches and scene selectors can be linked together in a group. The switch uses EnOcean technology and does not need batteries or any power supply. Every time the switch is physically pressed it generates energy and transmits a wireless message to the luminaires.
-
Page 12: Rocker Switch
(1) this time. luminaire will FLASH twice and group light level will go to 5%. Luminaire 10 sec. 10 sec. 10 sec. 12 Philips Lighting Controls... - Page 13 Close group Luminaire Luminaire Point to any of All the luminaires in the the luminaires group will go to 50% added in the light level. group and Luminaire press “close.” Test the switch Install the rocker pad back on the All the luminaires in switch and test the switch by pressing the group will turn on/...
- Page 14 The scene selector can only recall a light level stored as a scene and does not act as a dimmer. For dimming functionality use the wireless switch. A long press action on the scene selector button will delink the scene selector from the SpaceWise group. Unlock the group Luminaire...
- Page 15 Open Group Luminaire Luminaire Point remote to Wait for the the entire any luminaire luminaire group to dim and press down to 5%. “open,” once. Luminaire Make sure the button is pressed only once. Pushing multiple times can create multiple networks which can cause undesired operation. Link the scene selector Select the correct wireless channel If the switch joins...
- Page 16 “send.” daylight calibration. Group is ready for normal operation. Luminaire Scene selector Test the scene selector by pressing All the luminaires in the buttons. the group will react to the button action. Luminaire Test 16 Philips Lighting Controls...
- Page 17 Industrial applications...
- Page 18 Confirm all components received Luminaires SpaceWise remote Instructions: • Luminaire installation instructions (In luminaire box) • Accessory installation (In accessory box) Additional information can be found at www.philips.com/spacewise: • SpaceWise User Manual • SpaceWise Design Guide 18 Philips Lighting Controls...
- Page 19 Plan luminaire wireless groups Group 1 Group 1 Group 2 When configuring open plan areas with the SpaceWise Remote, large groups of 30-50 luminaires are recommended to maintain the lighting aesthetics of the space. Smaller groups may turn off more frequently than desired.
- Page 20 Luminaire Walk to the next Luminaire will dim luminaire to be down to 5%. added to the Luminaire group, point to the luminaire and press “add.” Repeat step for adding all the luminaires in the group. 20 Philips Lighting Controls...
- Page 21 Close group Luminaire Luminaire Point to any of All the luminaires in the the luminaires group will go to 50% added in the light level. group and Luminaire press “close.” Verify the group Luminaire Luminaire Point to any of the All the luminaires in the luminaires in the group will turn...
- Page 22 Choose an application mode Choose the desired application mode per group. Behavior varies for each application. See the SpaceWise Design Guide for more details. Hold Prolong Application ON/OFF behavior Mode time time Warehouse Auto ON/Auto OFF 2 min 2 min...
- Page 23 5b. Creating zones in a group Up to 16 zones can be created within a SpaceWise group and each luminaire can be part of just one zone. All luminaires within the zone will react the same way to any sensor in the zone.
- Page 24 “Zone,” once. Make sure the zone button is pressed only once. Up to 16 zones can be defined and every time the zone button is pressed a new zone creation process is initiated. 24 Philips Lighting Controls...
- Page 25 Build zone Luminaire Luminaire Added luminaire will Walk to the next go to 50%. luminaire to be added to the Luminaire zone, point to the luminaire and press “add.” Repeat step for adding all the luminaires in the zone. and 6c. Note that a luminaire To create new zones repeat steps can only be part of one zone.
- Page 26 “zone” Luminaire Point to the same luminaire in the zone and press Luminaire “on” or “off.” 70% G To stop the test process, point to the same luminaire and press “close.” 26 Philips Lighting Controls...
- Page 27 Daylight Calibration Daylight calibration should be performed during night time. Daylight calibration is set for all the luminaires in the group. Unlock the group Luminaire Luminaire Point to any of Red LED on the luminaires remote will in the group and start blinking.
- Page 28 “lock.” Wait for LED to The luminaire will O ))) FLASH twice and the stop blinking group will adjust its light (apx. 10 seconds) level as per the new then press “send.” daylight set point. Luminaire 28 Philips Lighting Controls...
-
Page 29: Troubleshooting
& Troubleshooting... - Page 30 IR group reset Luminaire mode? test 100 h elay daylight RF channel delay daylight RF channel save scene zone Luminaire config mode O ))) ckground IR group reset link? mode? test 100 h Luminaire 30 Philips Lighting Controls...
-
Page 31: Frequently Asked Questions
Frequently asked questions My luminaire group is at low light level and does not respond to SpaceWise remote buttons. Luminaire may be in “open” group state. “close” the group by referring to instructions in step 4c. My luminaires are not turning off at night. - Page 32 © 2015 Koninklijke Philips N.V. All rights reserved. Philips reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication.