Connect The Printer To A Computer Using A Wired Lan - Brother TD4420DN User Manual

Home > Install Software
Wired LAN

Connect the Printer to a Computer Using a Wired LAN

Related Models: TD-4420DN
To use a static IP address to connect your printer with a wired LAN connection, install the printer drivers and
Printer Setting Tool, and then specify the wired LAN connection settings.
Network Cable
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet
Network.
IMPORTANT
Do not connect this product to any LAN connection that is subject to overvoltages.
1. If on-screen instructions appear during the installation, make sure the printer is turned off before connecting
the LAN cable.
2. Connect the LAN cable to the LAN Port on the back of the printer.
3. Turn on the printer.
Related Information
• Connect the Printer to a Computer
> Connect the Printer to a Computer > Connect the Printer to a Computer Using a
23