Static 4-Point Seat Belt; Seat Belt Inspection - Polaris RZR XP TURBO S 2019 Owner's Manual For Maintenance And Safety

SEAT BELTS
This POLARIS vehicle is equipped with seat belts for all riders. Always make
sure the seat belts are secured for the operator and all passengers before riding.
The driver's seat belt is equipped with a seat belt interlock. Vehicle speed will be
limited to 15 MPH (24 km/h) if the seat belt is not secured.

STATIC 4-POINT SEAT BELT

This vehicle is equipped with a safety harness with built-in interlock. To wear the
4-point seat belt properly, follow this procedure:
1. Buckle up:
• Slide arms under each shoulder web. Do not twist webbing.
• Insert tongue into buckle until you hear a CLICK.
2. TUG slightly on buckle and tongue to make sure belt is securely fastened.
3. Position buckle low and centered on pelvis. SNUG each side of the lap belt
by pulling each adjuster strap.
4. Pull torso belts snug.
5. Latch chest clip (if applicable).
To release belt: Depress button with thumb or finger. Tongue will eject from
buckle.

SEAT BELT INSPECTION

Inspect all seat belts for proper operation before each use of the vehicle.
1. Pull each seat belt completely out and inspect the full length for any damage,
including cuts, wear, fraying or stiffness. If any damage is found, or if the seat
belt does not operate properly, have the seat belt system checked and/or
replaced by a qualified technician.
2. To clean dirt or debris from the seat belts, sponge the straps with mild soap
and water. Do not use bleach, dye or household detergents. Rinse the entire
length of the belt webbing.
FEATURES AND CONTROLS
41