Table of Contents
Advertisement
8
UTILITY PACKAGE (GX Configurator-MB)
Module status
COM. ERR. LED OFF request (*1)
X/Y Monitor/test (*2)
Basic/MODBUS device assignment parameter status (*2)
Automatic communication status (*2)
Error log (*2)
Communication status (*2)
PING test (*2)
8 - 18
Monitor/Test Items
INIT. status
OPEN status
LED ON status
ERR. status
COM. ERR. status
*1: For the COM. ERR. OFF request, select the corresponding request in the Setting value
column.
Refer to Section 11.4.1 for details.
*2: To move to each sub screen, click the button in the Setting value column.
*3: The switch 5 cannot be checked in Monitor/Test screen.
[Specifications common to Monitor and Test screens (including sub
screens)]
The following explains the specifications common to respective screens.
(1) Display data
Setting item
: Displays I/O signals and buffer memory names.
Current value : Monitors the I/O signal states and present buffer memory values.
Setting value : Enter or select the data to be written by test operation.
(2) Command buttons
Current value display
Make text file
Start monitor / Stop monitor
Execute test
Close
Buffer memory
address
Displays the current value of the item selected.
(This is used to check the text that cannot be
displayed in the current value field. However, in
this utility package, all items can be displayed in
the display fields).
Creates a file containing the screen data in text
file format.
Selects whether or not to monitor current values.
Performs a test on the selected items. To select
more than one item, select them while holding
down the Ctrl key.
Closes the screen that is currently open and
returns to the previous screen.
MELSEC-Q
Reference
section
0C05
H
Section 11.2
(3077)
Section 11.4.1
Section 8.6.1
Section 8.6.2
Section 8.6.3
Section 8.6.4
Section 8.6.5
Section 8.6.6
8 - 18
Advertisement
Table of Contents
