Connecting The Projector; Connecting With A Computer - Sony VPL-CX71 Operating Instructions Manual

Connecting the
Projector
When you connect the projector,
make sure to:
• Turn off all equipment before making any
connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; loose
connections may increase noise and
reduce performance of picture signals.
When pulling out a cable, be sure to pull it
out from the plug, not the cable itself

Connecting with a Computer

This section describes how to connect the
projector to a computer.
For more information, refer to the
computer's instruction manual.
16

Connecting the Projector

To connect a computer
Left side
INPUT A
AUDIO S VIDEO
3
to USB
connector
to monitor
output
to audio output
1 USB cable (supplied)
(Connect the USB cable to use a wireless
mouse.)
2 HD D-sub 15-pin cable (supplied)
3 Stereo audio connecting cable (not supplied)
(Use a no-resistance cable.)
Notes
• The projector accepts VGA, SVGA, XGA,
SXGA and SXGA+ signals. However, we
recommend that you set the output mode of
your computer to XGA mode for the external
monitor.
• If you set your computer, such as a notebook
type, to output the signal to both your
computer's display and the external monitor,
the picture of the external monitor may not
VIDEO
2 1
Computer