Table of Contents
Advertisement
The SET SETTING Menu
The SET SETTING menu is used for changing the settings of the projector.
SET SETTING
S m a r t A PA :
O n
Auto Input Search: O f f
Input-A Signal Sel.: C o m p u t e r
C o l o r S y s t e m :
Au t o
Pow e r S av i n g :
O f f
I R R e c e i v e r :
F ro n t & R e a r
I l l u m i n a t i o n :
O n
Pa n e l Key L o ck :
O f f
Setting items
Functions
Smart APA
The APA (Auto Pixel Alignment) automatically
adjusts "Dot Phase," "H Size" and "Shift" in the
INPUT SETTING menu for the input signal from a
computer.
• On: When a signal is input from a computer, the
APA functions automatically so that the picture can
be seen clearly. Once the specified input signal has
been adjusted by the "Smart APA," it will not be
readjusted even when the cable is disconnected and
connected again or the input channel is changed.
You can adjust the picture by pressing APA key on
the Remote Commander even if the "Smart APA"
set to "On."
• Off: The APA functions when you press the APA
key on the Remote Commander.
Auto Input Search When set to "On," the projector detects input signals
in the following order: Input-A/Video/S-Video. It
indicates the input channel when the power is turned
on or the INPUT key is pressed.
Input-A Signal
Selects the "computer," "component" or "video GBR"
Sel.
signal input from the INPUT A connector.
Color System
Selects the color system of the input signal.
If you select "Auto," the projector detects the color
system of the input signal automatically. If the picture
is distorted or colorless, select the color system
according to the input signal.
When the color system of the input signal is PAL60,
select "PAL." If "Auto" is selected, the color system
cannot be detected.
Input-A
Initial setting value
On
Off
Computer
Auto
The SET SETTING Menu
31
Advertisement
Table of Contents
