Huawei SUN2000-175KTL-H0 Quick Manual
Hide thumbs
Also See for SUN2000-175KTL-H0:
- User manual (132 pages) ,
- Quick manual (29 pages) ,
- User manual (94 pages)
Related Manuals for Huawei SUN2000-175KTL-H0
Summary of Contents for Huawei SUN2000-175KTL-H0
- Page 1 SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1) Quick Guide Issue: 04 Part Number: 31500AQK Date: 2019-06-06 HUAWEI TECHNOLOGIES CO., LTD.
-
Page 2: Product Overview
Before installing the device, read the user manual carefully to get familiar with product information and safety precautions. Huawei shall not be liable for any consequences caused by the violation of the storage, transportation, installation, and operation regulations specified in this document and the user manual. -
Page 3: Installation Requirements
SUN2000 Dimensions Mounting Bracket Dimensions Installation Requirements Installation Angle... -
Page 4: Installation Space
Installation Space NOTE For ease of installing the SUN2000 on the mounting bracket, connecting cables to the bottom of the SUN2000, and maintaining the SUN2000 in future, it is recommended that the bottom clearance be between 600 mm and 730 mm. Installing the SUN2000 •... - Page 5 2. Unpack the inverter and move it to the specified position. NOTE Handles are packed in a fitting bag and are not delivered with the SUN2000. 3. Adjust the installation positions of the handles, and install the SUN2000 on the mounting bracket.
-
Page 6: Installing Cables
Installing Cables Installation Preparations If outdoor copper-core cables are used, select copper wiring terminals. For details about the requirements for cables and terminals of other materials, see the user manual. Item Type Specifications Description • PE cable Conductor cross- Single-core outdoor If you choose the sectional area ≥... -
Page 7: Installing The Pe Cable
Item Type Specifications Description • RS485 Outdoor shielded Conductor cross- When three communication twisted pair cable sectional area: 0.25–1 communications cables s cable connect to the signal • Cable outer diameter: cable connector, the 4–11 mm outer diameter of the cables should be 4–8 •... -
Page 8: Opening The Maintenance Compartment Door
Opening the Maintenance Compartment Door • Do not open the host panel of the SUN2000. • Before opening the SUN2000 maintenance compartment door, turn off the downstream AC output switch and three DC switches at the bottom. • Do not open the maintenance compartment door in rainy or snowy days. If you must, take protective measures to prevent rain or snow from entering the maintenance compartment. - Page 9 3. Remove the crimping modules and three-hole rubber plug that are bound in the maintenance compartment for future use. Crimping module Three-hole rubber plug (Optional) Replacing the Crimping Module If the AC output power cable has a single core, replace the crimping module.
- Page 10 Removing the Rubber Rings from the Crimping Module Use scissors to cut off the joints of the rubber rings to remove them. All rubber rings are removed in the same way. (Optional) Installing the Solar Tracker Power Cable 1. A switch-disconnector-fuse or fuse-switch-disconnector with a voltage of no less than 800 V, current of 16 A, and protection type of gM needs to be installed between the SUN2000 and the tracker controller for protection.
-
Page 11: Installing Ac Output Power Cables
Installing AC Output Power Cables • Remove the corresponding rubber rings in strict accordance with the cable diameter, and ensure that the crimping module is not damaged. Otherwise the protection level of the solar inverter will be affected. • Ensure that AC terminations provide firm and solid electrical connections. Failing to do so may cause SUN2000 malfunction and damage to its terminal block, even starting thermal events. - Page 12 Single-core Cable 32-35 mm (four rings) 28-32 mm (three rings) 22-28 mm (two rings) 14-22 mm (one ring)
-
Page 13: Closing The Maintenance Compartment Door
Closing the Maintenance Compartment Door Installing DC Input Power Cables Selecting DC Input Terminals The SUN2000 has three DC switches (DC SWITCH 1, DC SWITCH 2, and DC SWITCH3). DC SWITCH 1 controls routes 1–6 of DC input terminals, DC SWITCH 2 routes 7–12, and DC SWITCH 3 routes 13–18. - Page 14 1. Use the MC4 EVO2 PV connectors delivered with the SUN2000. If the PV connectors are lost or damaged, purchase the connectors of the same model. The device damage caused by incompatible PV connectors is beyond the warranty scope. 2. Before connecting DC input power cables, label the cable polarities to ensure correct cable connections.
-
Page 15: Installing The Rs485 Communications Cable
Installing the RS485 Communications Cable 4.10 1. The RS485 and MBUS communication modes are mutually exclusive. 2. When routing communications cables, separate communications cables from power cables to prevent communication from being affected. Communication Port Pin Definition Port Definition Definition Description RS485-1 1 RS485A IN, RS485... -
Page 16: Verifying The Installation
Connecting Communications Cables If three communications cables are to be connected, use the three-hole rubber plug that is bound in the maintenance compartment. Verifying the Installation 1. The SUN2000 is installed correctly and securely. 2. The DC switches and downstream AC switch are OFF. 3. -
Page 17: Powering On The System
Powering On the System Before turning on the AC switch between the SUN2000 and the power grid, use a multimeter to check that the AC voltage is within the specified range. 1. Turn on the AC switch between the SUN2000 and the power grid. 2. - Page 18 The app name is SUN2000. 2. Access the Huawei app store (http://appstore.huawei.com), Google Play (https://play.google.com), or App Store (iOS), search for SUN2000, and download the SUN2000 app software package.
-
Page 19: Troubleshooting
Switching Selecting a Quick Login screen between users connection mode settings Main menu screen • The screenshots in this document correspond to app version 2.2.00.050 (Android). • When the WLAN connection is used, the initial name of the WLAN hotspot is Adapter-WLAN module SN, and the initial password is Changeme. - Page 20 Grid Code Mapping Table Grid Code Description SUN2000- SUN2000- SUN2000- 175KTL-H0 185KTL-INH0 185KTL-H1 CHINA_MV800 China medium-voltage power Supported grid G59-England-MV800 G59 medium-voltage power Supported grid AS4777-MV800 Australia medium-voltage Supported power grid INDIA-MV800 India medium-voltage power Supported grid IEC61727-MV800 IEC61727 medium-voltage Supported Supported power grid (50 Hz)
- Page 21 Grid Code Description SUN2000- SUN2000- SUN2000- 175KTL-H0 185KTL-INH0 185KTL-H1 DUBAI-MV800 Dubai medium-voltage Supported power grid SAUDI-MV800 Saudi Arabia medium- Supported voltage power grid EN50438_IE-MV800 Ireland medium-voltage Supported power grid CLC/TS50549_IE- Ireland medium-voltage Supported MV800 power grid (CLC/TS50549) Northern Ireland- Northern Ireland medium- Supported MV800 voltage power grid...
- Page 22 Grid Code Description SUN2000- SUN2000- SUN2000- 175KTL-H0 185KTL-INH0 185KTL-H1 TUNISIA-MV800 Tunisia medium-voltage Supported power grid AUSTRALIA-NER- Australia NER standard Supported MV800 medium-voltage power grid VDE-AR- VDE4120 standard Supported N4120_HV800 medium-voltage power grid Nicaragua-MV800 Nicaragua medium-voltage Supported power grid Custom-MV800-50Hz Reserved Supported RD1699/661-MV800 Spain medium-voltage...
- Page 23 Huawei Technologies Co., Ltd. Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People's Republic of China solar.huawei.com...