Connecting A Digital Satellite Receiver - Sony KE-42M1 Operating Instructions (primary manual) Operating Instructions Manual

Connecting a Digital Satellite Receiver
Disconnect all power sources before making any connections.
1
Using a component video cable, connect the Digital Satellite Receiver's
Y, PB and PR jacks to the Y, PB and PR jacks on the TV. Use the HD/DVD
IN 4 connections.
Note
Component video (Y, PB,PR) connection is necessary to view 480p, 720p, and 1080i
formats. Note that this TV displays all format types of picture in a resolution of
852 dots x 480 lines.
2
Using an AUDIO cable, connect the Digital Satellite Receiver's AUDIO
OUT jacks to the TV's AUDIO IN jacks.
Note
The Y, PB and PR jacks do not provide audio, so audio cables nmst be connected to
provide sound.
Rear of TV
2
AUDIO cable
(not supplied)
Component --
video cable
(not supplied)
AUDIO-L S
(white) J
AUDIO-R
(red)
Digital Satellite Receiver
3O