Toshiba APOGEE FLN APG001Z Function Manual page 18

69 FLN LOC REF
94 RESET FAULT
97 MBOX READ
98 MBOX WRITE
Commanded from the FLN network to temporarily "steal" input setpoint
control of the drive from its normal source and place it under the FLN network
control.
This functionality is analogous to placing the drive in HAND mode at the
panel, with the setpoint control being taken from the FLN network instead.
HAND mode at the panel has priority over this point. Thus, this point is only
effective in temporarily taking control from the analog inputs or some other
internal control functionality.
Command from the FLN network to reset a faulted drive (1 = RESET, 0 =
NO).
The control input is rising-edge sensitive, so, once the command is issued,
this point automatically returns to its inactive state. This "momentary"
operation avoids any need for an explicit command to clear the point before a
subsequent reset can be issued.
Refer to section 5.
Refer to section 5.
- 17 -
E6581542①