Fujitsu M255XK Customer Engineering Manual page 60

Figure 4-23 Head Carriage Assembly Replacement
4.5.1 Head Carriage Replacement (Continued)
13. Reverse the procedure described in step 8 and reinstall the steel band in the
pulley section of the stepping motor.
Note:
Carefully clean the. surfaces of the steel band, pulley and other
mechanisms with alcohol and gauze before assembly.
14. Reverse the procedures described in steps 6 and 7 to reconnect the steel band
to the head carriage assembly (use band fixing plate B and the band spring).
T5-021-013087 ••• 01
4-28