Detailed Command Descriptions; Alarm - GE MDS 4790 Series Installation & Operation Manual

Data Buffering
A
B screen, Page 74
This graphic points you to the
corresponding front panel
menu
Alarm Summary
MDS 05-3438A01, Rev. F
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8457-MDS-UP-9790X.aspx
Table 9. PC Commands—
Owner and Radio Information (Continued)
FRONT PANEL
PC COMMAND MENU
SREV Software Revision
Details, page 55 Details, page 78
UNIT [10000–65000] Unit Diagnostic
Details, page 59 Address
Details, page 59

6.3 Detailed Command Descriptions

This section gives more detailed information for most commands listed
in the previous tables. The commands are cross-referenced to descrip-
tions of corresponding commands entered using the front panel display
and control buttons (see radio graphic at left).

ALARM

The and
ALARM STAT
vides alarm information in a concise, two-line format. Alarm codes are
summarized in hexadecimal format.
includes a text message describing each alarm.
The first line of the response to the
indicating whether or not alarms are present. The second line is a hexa-
decimal numeric code representing the system alarm state. Examples of
responses are:
NO ALARMS PRESENT
CODE: 0000 0000
MINOR ALARMS PRESENT
CODE: xxxx xxxx
MAJOR ALARMS PRESENT
CODE: xxxx xxxx
MDS 4790/9790 Series I/O Guide
DESCRIPTION
Display software revision information
Display the radio's unit address
Active Radio Status
A
B
Page 77
commands report on current alarms.
(described on
STAT
command is a simple message
ALARM
screen,
pro-
ALARM
Page 56)
37