GE MDS 4790 Series Installation & Operation Manual page 84

Backlight Intensity
B a c k l i g h t I n t e n s i t y
0 5 0 10 0
n n n n n n n n n n
Set Owner Name
S e t O w n e r N a m e
^
_ ! " # $ % & ' ( ) * + , - . / 0 1 2 3
Set Owner
Message
S e t O w n e r M e s s a g e
76
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8457-MDS-UP-9790X.aspx
To change the selection, press ENTER, then use the left/right arrow buttons to
move the bar display to the desired setting. The screen changes dynamically to
show the effects of the change. Press ENTER again to set the change.
Use this screen to set the brightness of the front panel display's background.
Making the screen background brighter or dimmer might aid the clarity of the front
panel display when viewed under different light conditions.
The bar display indicates the relative brightness of the screen background, with 0
being dim and 100 being very bright.
To change the selection, press ENTER, then use the left/right arrow buttons to
move the bar display to the desired setting. The screen changes dynamically to
show the effects of the change. Press ENTER again to set the change.
Use this screen to set or show text (up to 20 characters) that appears on the radio's
start-up screen, such as the system name.
Press ENTER to show a scrollable line of characters at the bottom of the screen.
Use the cursor (_) to select a character for the owner name
shows the current character position.
• Press the up arrow
the first character of the owner name. As you scroll to the left, the character
under the cursor appears above the caret.
• Press the right arrow
position to the right.
• Press the up or down
character.
• Continue in this way, using the up/down arrow buttons to move the cursor to
a character, then pressing the right arrow button to move to the next character
position.
• Press ENTER to save the owner name.
Use left and right
arrow buttons to move
the caret (ˆ) left and right
Figure 32. Setting the Owner Name and Message
Use this screen to set or show text (up to 20 characters) that appears on the radio's
start-up screen, such as the site name. See the Set Owner Name command and
Figure 32 above for instructions.
MDS 4790/9790 Series I/O Guide
(Figure
button to move the cursor to the left until it is under
button once to move the caret one character
arrow buttons to move the cursor to the next
OWN [xxxxx] command,
Twenty-character text line
Use up and down
arrow buttons to move
the underscore (_) left
and right
OWM [xxxxx]
Page 50
MDS 05-3438A01, Rev. F
32). A caret (^)
Page 50
command,