Use Of The Connector - Philips GreenPower LED Series Application Manual

Close
Click
Automatic locking mechanism
Important
IP66 and UL/CSA rating
When closing the connector, be certain the two snap
tight for a tight seal. Otherwise, the units are not
protected from moisture and the IP66 and UL/CSA
rating for wet locations will be void.
September 2018
Open

Use of the connector

The connectors lock automatically when plugged together
and give the user clear feedback on the correct end position.
A slight rotation severs the connection easily.
Wiring the connectors
The housing of the connector has been designed in three
parts. Related technical information and installation
instructions are available from the connector supplier
Wieland Electric GmbH - www.wieland-electric.com
Connector wire terminals
Power connector
L
N
Application Guide - Philips GreenPower LED production module
Line
Neutral
Earth
8