Mitsubishi Electric AE-200A Installation Manual page 32

(3) In the [Internet Protocol Version 4 (TCP/IPv4) Properties] window,
check the radio button next to [Use the following IP address].
Enter [192.168.1.*] in the [IP address] field. (The number indicated
with an asterisk must be different from the IP address of the
AE-200/AE-50 to be updated.)
Leave [255.255.255.0] in the [Subnet mask] field as it is.
Note: If the IP address of the AE-200/AE-50 is [192.168.1.1], set the same 1st, 2nd,
and 3rd numbers and different 4th number, such as [192.168.1.2].
Note: Default IP address of AE-200/AE-50 is [192.168.1.1].
Note: When performing an update on a PC that is already connected to the existing
LAN, [255.255.255.0] may not appear in the [Subnet mask] field. When
[255.255.0.0] appears, enter the same 1st and 2nd numbers (192.168) and
different 3rd or 4th number of the IP address of the AE-200/AE-50 in the [IP
address] field.
[2] Update procedures
(1) Make sure that the PC that has been set in section [1] above and the AE-200/AE-50 to be updated are
connected with a LAN cable.
(2) Turn on the power to the AE-200/AE-50, and insert a USB memory device in which the update file is stored
to the PC.
(3) Enter the web page address in the address field of the Web browser as follows:
https://[IP address of each AE-200/AE-50]/swupdate/Update.html
Press the [Enter] key.
Note: If the IP address of the AE-200/AE-50 is [192.168.1.1], the web page address is [https://192.168.1.1/swupdate/Update.html].
(4) If the security certificate is invalid, a security certificate error page (as
shown at right) will appear.
Click [Continue to this website (not recommended)].
(5) Enter the maintenance user name and the password in the login
screen, and click [OK]. (Default user name: initial, Default password:
init)
(6) A software update screen will appear.
WT07935X04 32
AE-200A
#.##(*.**)
xxxxxx