Getting Started
Hooking up the system
Perform the following procedure 1 to 9 to hook up your system using the supplied cords and
accessories.
The rear cover
AM loop antenna
1 Set the speaker cord into the speaker
cord groove at the bottom of the
speaker.
Otherwise, the speaker cord could be
damaged.
Right speaker
Before attaching the system to the stand, draw the
wires under the horizontal bar of the stand.
Otherwise, the wires could be damaged.
2 Attach the speakers.
Afterwards, push down on the speakers to
make sure they are securely fastened to the
main unit.
Desktop stand
FM antenna
Left speaker
continued
GB
9