Activating The Probe; Disconnecting The Probe - GE LOGIQ 7 Basic User Manual

Hide thumbs Also See for LOGIQ 7:

Table of Contents

Preparing the System for Use

Activating the Probe

To activate the probe, select the appropriate probe from the

probe indicators on the Touch Panel.

Figure 3-22. Probe Indicators

1. Probe Indicators

The probe's default settings for the mode and selected exam are

used automatically.

Probes can be disconnected at any time. However, the probe

should not be active when disconnecting the probe.

Ensure the probe is deactivated. Deactivate by selecting

another probe or pressing Freeze.

Move the probe locking handle counterclockwise.

Pull the probe and connector straight out of the probe port.

Carefully slide the probe and connector away from the

probe port and around the right side of the keyboard.

Ensure the cable is free.

Be sure that the probe head is clean before placing the

probe in its storage box or a wall hanging unit.

LOGIQ 7 Basic User Manual

Direction 2392206-100 Rev. 1