For Safety And Environment; General Safety; Electrical Safety - Beko BCT9031G User Manual

This section contains safety
instructions that will help protect from
risk of personal injury or property
damage. Failure to follow these
instructions shall void any warranty.
General safety
• The appliance is not intended for
use by persons (including chil-
dren)
with reduced physical, sensory or
mental capabilities, or lack of ex-
perience and knowledge, unless
they have been given supervised
or instruction concerning use of
the appliance by a responsible
person for their safely.
• Young children should be
supervised to ensure that they do
not play with the appliance.
• Installation and repair procedures
must always be performed by
Authorized Service Agents. The
manufacturer shall not be held
responsible for damages arising
from procedures carried out by
unauthorized persons which may
also void the warranty. Before
installation, read the instructions
carefully.
• Do not operate the product if it is
defective or has any visible
damage.
4/EN
• Make sure that the product
function knobs are switched off
after every use.
Electrical safety
• If the product has a failure, it
should not be operated unless it
is repaired by the Authorized
Service Agent. There is the risk of
electric shock!
• Only connect the product to a
grounded outlet/line with the
voltage and protection as
specified in the "Technical
specifications". Have the
grounding installation made by a
qualified electrician while using
the product with or without a
transformer. The Manufacturer
shall not be liable for any
problems arising due to the
product not being earthed in
accordance with the local
regulations.
• Never wash the product by
spreading or pouring water onto it!
There is the risk of electric shock!
• The product must be unplugged
during installation, maintenance,
cleaning and repairing procedures.
• If the supply cord is damaged, it
must be replaced by the manu-
facturer or its service agent or a