Installation - Philips 24BDL4151T User Manual

24BDL4151T
1.3.

Installation

1.3.1. Connecting the power cable
1. Connect the power adapter's connector into the display's power
input socket.
2. Insert the matching AC plug fully into the power adapter.
3. Plug the AC plug of your power adapter into an electric outlet to
power on the device.
1.3.2. Inserting the Micro SD card
1.3.3. Using the touch function through a PC
1. Use the HDMI cable provided to connect from HDMI input to
HDMI output of the PC.
2. Use the USB cable provided to connect the display to a PC through
OTG port.
HDMI IN
1.3.4. Installing the stand
1. Ensure that the display is powered off.
2. Spread a protective sheet on a flat surface to facilitate your
3. Lay the display face-down on the protective sheet.
4. Install the stand with four screws.
5. Lift the stand until a click sound is heard.
HDMI Out
PC
2
operation without scratching the screen.
The tile angles for keeping the stand stable are 24.5 and 62 degrees.
24.5°
62.0°