s2
Fig. VII
-37.
Correct (G
-Y)
signal
4. Checking the (G-Y) output signal of the matrixing circuit
— Connect the Y-input of the oscilloscope to the "green" grid of the
picture tube via an attenuator probe.
— Trigger the oscilloscope externally with the line sync. pulses from
sockets "SYNC." (switch "SYNC." in position "LINE").
— Adjust the time base settings of the oscilloscop so that one TV-line
appears on its screen.
— Depress push-button "MATRIX".
1
1
1
1
1
1
1