The Timer; Setting The Clock - Sony CFD-S28L Operating Instructions Manual

The Timer

Setting the clock

"- -:- -" indication appears in the
display until you set the clock.
Tip
The time display
system:
24-hour system
Before you set the clock, connect the power source (see
page 24).
1
Press CLOCK for 2 seconds until the hour digit
flashes.
2
Press TIME SET•TUNE + or – until you set the
current hour. Then press DISPLAY ENT•
MEMORY.
The minute digits flash. Set the minutes by
pressing TIME SET•TUNE + or – until the correct
minute is displayed.
3
Press DISPLAY ENT•MEMORY.
The clock starts from 00 seconds.
CLOCK
DISPLAY ENT
MEMORY
TIME SET
TUNE +, –
/
The Timer
21 GB