Silvercrest SWKD 2400 A1 Operating And Safety Instructions Manual page 35


Press the keep-warm button
target temperature. You can also adjust this target temperature to a value between 40°C and
90°C in increments of 5°C by pressing the
next to the degree sign on the right side of the display (12) when the keep-warm function is
activated. The display (12) is lit up in blue and the selected target temperature flashes while the
water is being heated. As soon as the water reaches the selected target temperature, this
continuously flashes in the display (12). You can deactivate the keep-warm function at all times
by pressing the on/off button
lasts for a maximum of two hours. The pot (3) then automatically switches off.

As soon as the pot (3) is lifted off the base (5), the pot automatically switches off and the
display (12) goes out.

Pull out the power cable (6) plug from the socket after the heating or keep-warm process is
complete. Remove the pot (3) from the base (5) and pour away the water.
DANGER of burn injuries
Never touch the housing of the pot (3) during and immediately after operation.
Only use the handle (7) to hold or carry the pot (3).
Hot steam is released when the water boils. Make sure not to burn yourself.
Wear
pot (3) so that the steam is directed away from you.
(8) in order to activate the keep-warm function for the selected
(11) or
(9) or the keep-warm button
an oven glove,
SilverCrest SWKD 2400 A1
(10) buttons. The
(8). The keep-warm function
if necessary.
icon flashes
Turn the
English - 33