Page 1
www.freeservicemanuals.info 1/20/2019 HISTORY Model Name: KDL-32/40BX400 SERVICE MANUAL Click on Page Number to display details of change Date Part Number Description of Revisions Version 2010.01 9-883-479-01 Original Manual 2010.10 9-883-479-02 How to reset (OSD Menu errors) (P8) Add Screw Part Number (Base / Stand) (P18) 2010.12 9-883-479-03...
Page 2
1/20/2019 AZ1-N(5-2) SERVICE MANUAL CHASSIS MODEL MODEL DEST DEST KDL-32BX400 KDL-40BX400 AEP / UK AEP / UK RM-ED022 - - Digitized in Heiloo the Netherlands Not for sale!
COMPONENTS IDENTIFIED BY SHADING AND MARKED THE EXPLODED VIEWS AND IN THE PARTS LIST ARE CRITICAL FOR SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. - 2 -...
Due to the higher melting point of Lead Free Solder the soldering iron tip temperature needs to be set to 370 degrees centigrade. This requires soldering equipment capable of accurate temperature control coupled with a good heat recovery characteristics. For more information on the use of Lead Free Solder, please refer to http://www.sony-training.com UK PLUG WARNING WARNING (UK Models only) The flexible mains lead is supplied connected to a B.S.
www.freeservicemanuals.info 1/20/2019 SPECIFICATIONS Model name KDL- KDL-40BX4/ KDL- KDL-32BX3/ KDL- KDL- 46EX4xx EX4/NX5xx 37EX4xx BX4/EX3/EX4/ 26EX3xx 22EX3xx NX5xx System Panel System LCD (Liquid Crystal Display) Panel TV System Depending on your country/region selection Analogue: B/G/H, D/K, L, I Digital: DVB-T, DVB-C Colour/Video System Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input) Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC HP@L4.0, MP@L3.0...
Page 6
www.freeservicemanuals.info 1/20/2019 Model name KDL- KDL-40BX4/ KDL- KDL-32BX3/ KDL- KDL- 46EX4xx EX4/NX5xx 37EX4xx BX4/EX3/EX4/ 26EX3xx 22EX3xx NX5xx Power in “Home”/ 142 W 110 W 95 W 74 W 52 W 39 W consumption “Standard” mode in “Shop”/ 183 W 144 W (KDL- 120 W 93 W (KDL- 62 W...
Page 7
www.freeservicemanuals.info 1/20/2019 PC Input Signal Reference Chart for PC IN Horizontal Vertical Signals Horizontal (Pixel) Vertical (Line) frequency Standard frequency (Hz) (kHz) 31.5 SVGA 37.9 VESA Guidelines 1024 48.4 VESA Guidelines WXGA 1280 47.4 VESA WXGA 1280 47.8 VESA WXGA 1360 47.7 VESA...
www.freeservicemanuals.info 1/20/2019 CONNECTORS 2 Pin Connector (SCART) Pin No AV-1 AV-2 Signal Signal Level • • Audio Output B Standard Level: 0.5V rms (Right) Impedance: less than 1KΩ* • • Audio Input B Standard Level: 0.5V rms (Right) Impedance: more than 10KΩ* •...
www.freeservicemanuals.info 1/20/2019 AZ-N SELF DIAGNOSTIC SOFTWARE The identification of errors within the AZ1-N chassis is triggered in one of two ways :- 1: Busy or 2: Device failure to respond to IIC. In the event of one of these situations arising the software will first try to release the bus if busy (Failure to do so will report with a continuous flash- ing LED) and then communicate with each device in turn to establish if a device is faulty.
www.freeservicemanuals.info 1/20/2019 2-5. Under Cover Removal 2-6. Static Converter Board Removal Screw Screws To remove the ‘Under Cover’ first remove the ‘Rear Cover’ To remove the ‘Static Converter’ board disconnect all (See Sec 2-2-1) and then the ‘Stand Assy’ (See Sec 2-2-2). connectors and then remove the 4 screws circled and ease the Then remove the 1 screw circled and gently pull the board gently away from the back of the TV set.
www.freeservicemanuals.info 1/20/2019 SECTION 3 SERVICE MENUS 3-2. Service Menu Structure 3-1. How to enter the Service Mode Service adjustments to this model can be performed using the The following descriptions show the items that can be supplied Remote Commander (See front cover). viewed and/or adjusted using the Service Menu.
www.freeservicemanuals.info 1/20/2019 3-2-3. OSD Service Menu 3-2-4. Country Selection The following menu appears on the screen when you enter The following menu appears on the screen when you enter the ‘OSD Service Menu’ (See Pic.4). This menu allows the ‘Country Selection’ menu (See Pic.5). Using this menu viewing and adjustment of the AGC and viewing of the the destination country of the TV can be set.
www.freeservicemanuals.info 1/20/2019 3-3. TT MODE The TT modes described below are available by selecting the two Note : relevant digits. You can exit the ‘TT Mode’ by entering 00, by pressing the ‘Analog’ or the ‘Digital’ button, by switching the TV To place the Remote Commander in ‘TT Mode’...
www.freeservicemanuals.info 1/20/2019 SECTION 5 EXPLODED VIEWS NOTE : Non-serviceable items with no part number and no Items marked “*” are not stocked description are not stocked because they are not since they are seldom required for required for routine service. routine service.
Page 18
www.freeservicemanuals.info 1/20/2019 5-1. CHASSIS Cont. REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK A-1765-913-A H2LS BOARD, COMPLETE 1-822-638-11 HDMI CONNECTOR 4-164-279-01 BRACKET, VESA (S) 1-842-087-11 D SUB CONNECTOR 1-821-834-12 USB CONNECTOR 1-822-524-31 PHONO JACK 2P 1-822-637-11 HDMI CONNECTOR 1-822-954-11 PHONO BLOCK, OPTICAL OUT 1-822-579-31 CARD CONNECTOR (PCMCIA CARD) 1-822-523-11 PHONO JACK 5P 1-822-581-22 MULTIPLE PHONO JACK 4P...
Note: To ensure safety and reliability it is Sony policy that boards should not be repaired in the field, as a result all boards are regarded as non service items for exchange only and are not indicated in the parts list of this service manual.