Silvercrest SSJ 150 A2 Operating Instructions Manual page 47

NOTE
► If food is stuck in the feed tube
proceed as follows:
–
Switch off the appliance immediately and pull the plug on the power
cable
–
Turn the housing lid
towards the marking on the sieve tray holder
into place.
–
Remove the housing lid
–
Remove the food pieces causing the blockage.
–
Reassemble the appliance and resume operation.
SAFETY CUT-OUT / RESET FUNCTION
► If pieces of food get stuck and the appliance turns itself off, the safety
cut-out has tripped. The appliance switches itself off before the motor can
be damaged by overheating. The appliance cannot be switched back on
until you reset the safety cut-out.
Proceed as follows to be able to use the appliance again.
–
Set the on/off switch
power cable
for 10–15 minutes.
–
Turn the housing lid
towards the marking on the sieve tray holder
into place.
–
Remove the housing lid
–
Remove the food pieces causing the blockage.
–
Carefully remove the sieve tray
base
–
Press the "reset" button on the underside of the appliance base
–
Reassemble the appliance and resume operation.
│ GB │ IE
■ 44
and cannot be freed with the pusher
out of the socket.
anticlockwise until the
.
into the "O" position and pull the plug on the
out of the socket. Allow the appliance to cool down
anticlockwise until the
.
over.
marking points
and clicks firmly
marking points
and clicks firmly
and turn the appliance
SSJ 150 A2
,
.