Descaling; Storage - Silvercrest SDMF 1300 A1 Operating Instructions And Safety Instructions

Descaling

The appliance must be descaled regularly to maintain its maximum
performance. The frequency of descaling depends on the quality of the water
and the frequency with which the appliance is used.
We recommend that you descale the appliance either once a year or after
50 hours of total use. We recommend descaling immediately, however, if you
notice that the appliance is generating less steam.
NOTE
► You can do this with a regular descaling agent containing citric acid.
Also observe the instructions for the descaling agent.
1) Ensure that the appliance has completely cooled down.
2) Add the descaling agent to the water tank
3) Plug the mains cable
pressing the On/Off switch
4) Allow the descaling agent to take effect for a few minutes.
5) Press the steam button
steam brush.
6) Afterwards, refill the water tank
cloth to remove descaler residues.

Storage

After use, allow the appliance to cool down completely.
Empty any remaining water from the water tank
Store the appliance in a clean, dry location.
■ 12 │ GB │ IE │ NI │ CY
.
into the power socket and turn on the power by
. The blue LED
and start steaming an old piece of cloth with the
with pure water and steam another old
flashes.
.
SDMF 1300 A1