D-Link DAP-1610 Quick Install Manual page 10

What if I forgot my Range Extender's Admin password or
want to reset my Range Extender?
1. If you forgot your Admin password or want to reset your
Range Extender back to the factory default settings, press
and hold the reset button on the bottom of the extender
using a paper clip and release after a minimum of 10
seconds. The Status light will turn red.
Note: This process will erase all your settings.
2. Setup your Range Extender using your preferred method.
What if WPS setup is not working?
WPS may be disabled on some Routers or Modems. If the
WPS Status LED on your Router or Modem does not start
blinking when you have pressed the WPS button, try again
and hold it a little longer. If it still does not blink, STOP, and
configure your Range Extender using Method Two:
QRS Mobile Setup, on page 6.
10
Reset
Button
DAP-1610 Install Guide