Table of Contents
Advertisement
Section 6
Configuring
6.1.4.3
26
GUID-86B29BA2-DF27-41CE-9359-F0DA0D7DFA32 V1 EN
Figure 19:
Selecting stp protocol mode
4.
In the Priority box, type a value, for example 8000, for test purposes.
5.
Click OK to confirm.
Configuring ports
1.
Click Ports to configure the port and to add bridge ports to the interface.
2.
Select the bridge port.
3.
Select the Ports tab.
4.
Click
to add a new port.
5.
In the Interface list, click the correct interface, for example ether1.
6.
In the Bridge list, click bridge1.
Leave the values in the Priority and Path Cost boxes as shown in the figure.
1MRS755551 B
Installation and commissioning manual
WGA631
Advertisement
Table of Contents
