Cancelling the process
Touch any sensor.
Resetting settings
It is not necessary to reset the router
when replacing it.
Switch the hob on.
Touch the 0 sensor control on any of
the numerical keybanks.
Touch the 0 and 9 sensor controls at
the same time for 6 seconds.
The seconds can be seen counting
down in the timer display. After the
6 seconds have elapsed, the : code
is displayed in the timer display for
10 seconds.
Before using for the first time
Setting up Con@ctivity
Con@ctivity is the direct communication
system between an electric Miele hob
and a Miele cooker hood. Con@ctivity
enables the cooker hood to operate
automatically depending on the
operational state of a hob.
Further information can be found in the
installation and operating instructions
for your cooker hood.
Con@ctivity via the home WiFi
network (Con@ctivity 3.0)
Pre-requisite:
– Home WiFi network
– WiFi-enabled Miele cooker hood
Connect the cooker hood and the
hob to your home WiFi network (see
"Setting up Miele@home").
The Con@ctivity function will be
activated automatically.
27