Charging The Battery - Sony SRS-HG10 Help Manual

Help Guide
Wireless Speaker
h.ear go 2 (SRS-HG10)

Charging the battery

You can operate the speaker by connecting to the AC outlet with the supplied USB AC adaptor or by using the built-in
lithium-ion battery (rechargeable).
Before turning on the speaker for the first time, be sure to charge the speaker for more than 1 hour.
When the battery is charged, you can use the speaker without using the USB AC adaptor.
Connect the supplied USB AC adaptor and micro-USB cable.
1
Connect the micro-USB cable to a DC IN 5V jack.
2
Connect the USB AC adaptor to an AC outlet.
3
Do not use other than the supplied USB AC adaptor, micro-USB cable, and AC power cord.
According to your country or region, connect the AC power cord and plug adaptor to the USB AC adaptor.
When the speaker is connected to an AC outlet via the USB AC adaptor, charging starts and the CHARGE indicator
lights up in orange. Charging is completed in about 5 hours
*1
When the speaker is turned off, time that is required to charge the empty battery to its full capacity.
Lifespan of a lithium-ion battery
When making a BLUETOOTH (SBC) connection: Approx. 12 hours (at normal playback)
When connected to a network: Approx. 8 hours (at normal playback)
*2
When the specified music source is used, the BLUETOOTH device is set to the maximum volume, and the volume level of the speaker is set to
43.
The battery life when the volume level of the speaker is set to maximum will be about 4 hours.
*3 When the specified music source is used, the network device is set to the maximum volume, and the volume level of the speaker is set to 43.
The battery life when the volume level of the speaker is set to maximum will be about 4 hours.
When the battery is running low
When the CHARGE indicator flashes slowly, the built-in battery is running low and needs to be charged. Charge the
speaker for more than 1 hour by connecting it to an AC outlet via the USB AC adaptor.
*1
and the indicator turns off.
*3
12
*2