Turning The Power On - Sony SRS-HG10 Help Manual

Help Guide
Wireless Speaker
h.ear go 2 (SRS-HG10)

Turning the power on

Press the (power) button.
1
The (power) indicator lights up in green.
It may take a while before the speaker turns on.
Depending on the remaining power of the built-in battery, the voice guidance is output from the speaker as follows.
"Battery fully charged"
"Battery about 80%"
"Battery about 60%"
"Battery about 40%"
"Battery about 20%"
"Battery level low, please charge"
"Battery level low" (While the speaker is charging)
Hint
The LINK indicator may also begin to flash or light up when the speaker is turned on.
When you turn on the speaker in the BLUETOOTH/Network standby mode, the speaker turns on automatically by operating a
BLUETOOTH device or network device, and then the BLUETOOTH or network connection starts (only when using the USB AC
adaptor).
The voice guidance for the remaining battery capacity (BATT Level) can be turned off by selecting [Setting] - [Power Option] -
[BATT Level] - [Off] on the menu of "Sony | Music Center."
Note
When the CHARGE indicator flashes, this indicates that the built-in battery is running low and needs to be charged. Charge the
speaker for at least 1 hour by connecting it to an AC outlet via the USB AC adaptor.
Related Topic
About the indicators
Using the BLUETOOTH
About the voice guidance
®
/Network standby mode
4-735-503-11(1) Copyright 2018 Sony Corporation
14