Switching Between Digital And Analog Audio (Input Mode) - Sony R-DG1200 Operating Instructions Manual

Switching between
digital and analog audio
(INPUT MODE)
When you connect components to both digital
and analog audio input jacks on the receiver,
you can fix the audio input mode to either of
them, or switch from one to the other,
depending on the type of material you intend
to watch.
THEATER THEATER
SHIFT SHIFT TV TV
1 1 2 2
VIDEO1 VIDEO1 VIDEO2 VIDEO2
4 4 5 5
SAT SAT TV TV
7 7 8 8
TUNER TUNER PHONO PHONO
-/-- 0/10 -/-- 0/10
HDMI1 HDMI1 HDMI2 HDMI2
SIRIUS SIRIUS
XM XM
2CH/ 2CH/
A.DIRECT A.DIRECT A.F.D. A.F.D.
INPUT INPUT
RESOLUTION RESOLUTION MODE MODE
2
HOME HOME
1
Press the input button.
You can also use INPUT SELECTOR on
the receiver.
2
Press INPUT MODE repeatedly
to select the audio input mode.
The selected audio input mode appears on
the TV screen.
AMP AMP
3 3
TV INPUT TV INPUT
BD BD DVD DVD
6 6
WIDE WIDE
MD/ MD/ SA-CD/ SA-CD/
1
TAPE TAPE CD CD
9 9
D.TUNING D.TUNING
MULTI MULTI
DMPORT DMPORT
IN IN
ENT/MEM CLEAR ENT/MEM CLEAR
HDMI3 HDMI3 HDMI4 HDMI4
MOVIE MOVIE MUSIC MUSIC
NIGHT NIGHT
SLEEP SLEEP MODE MODE
GUI GUI
MODE MODE
Audio input modes
• AUTO
Gives priority to digital audio signals when
there are both digital and analog
connections. If there are more than one
digital connection, HDMI audio signals have
priority over COAXIAL and OPTICAL
audio signals.
If there are no digital audio signals, analog
audio signals are selected.
• ANALOG
Specifies the analog audio signals input to
the AUDIO IN (L/R) jacks.
Notes
• Some audio input modes may not be set up
depending on the input.
• When HDMI input, XM, SIRIUS or DMPORT input
is selected, "------" appears on the display window,
and you cannot select other audio input modes.
Select an input other than the HDMI input, XM,
SIRIUS and DMPORT input, then set the audio input
mode.
• When "2ch Analog Direct" is being used, or the
multi channel input is selected, audio input mode is
set to "ANALOG". You cannot select other audio
input modes.
US
93