Operation; Touchscreen Display; Display Brightness Adjustment - GE QuickPanel+ IC755CxS06RDx User Manual

6

Operation

6.1

Touchscreen Display

The QuickPanel Operator Interface features a LED Backlight LCD touchscreen display with two-point touch technology.
+
The touch technology is based on projected capacitance that allows finger tracking without pressured contact. It is
conducive to smooth scrolling and multi-touch gesturing capability. Display brightness and backlight operation can be
configured using
the QuickPanel Setup tool available in the program system menu.
+
Caution
Note IC755CxS06RDx (6" display) is an Analog Resistive touch display that does not support two-point touch
capability. Single point gestures such as swipe, pan, and double-tap are supported.
6.1.1

Display Brightness Adjustment

➢ To adjust the brightness of the display
1. Open the QuickPanel
+
2. Set the backlight brightness value.
From the Setting backlight
brightness drop-down menu,
select a value between 1
(lowest setting ) and 16
(highest setting ).
3. Tap OK to exit the QuickPanel
4. Run the Backup Utility
Operation
For public disclosure
Although we recommend the use of the protective sheet, do not operate the
touchscreen with any hard materials, such as a screwdriver. This could damage
the touchscreen display.
Setup Tool and select the Backlight tab to display the Backlight Display Properties window.
Setup Tool.
+
to save the settings.
GFK-2847W 89