Page 1
Integration Procedures Page 3-4 Purpose This procedure describes the steps to install the OL-V323-2 IR Touch Overlay onto the V323-2 display. Notes and Warnings The overlay contains tempered glass. Use caution when handling. The overlay has an integrated USB cable located in the bottom right corner. Ensure the cable is not pinched, crushed, or damaged during installation.
Page 2
NEC Display Solutions of America, Inc. OL-V323-2 Installation Guide 10 Point Touch Overlay for the V323-2 Rev.1.2 Equipment OL-V323-2 IR touch screen overlay Bezel retention brackets for OL-V323-2 Note: Brackets attached to the overlay 6-32 x 3/8" Undercut Phillips Machine Screws Note: Quantity (1) Machine Screw Provided as Spare 10ft.
Page 3
NEC Display Solutions of America, Inc. OL-V323-2 Installation Guide 10 Point Touch Overlay for the V323-2 Rev.1.2 Integration Procedure Place the display face up on a padded surface for overlay integration. 6.1.1 Note that if the unit is already mounted, removing the unit and placing it face up is optional;...
Page 4
NEC Display Solutions of America, Inc. OL-V323-2 Installation Guide 10 Point Touch Overlay for the V323-2 Rev.1.2 Install the four (4) bezel retention “L” brackets on the top and bottom of the overlay. NOTE: ENSURE YOU INSTALL THE BRACKETS IN THE SAME LOCATION THEY WERE REMOVED FROM TO SECURELY MOUNT THE OVERLAY.