NEC OL-V552 Installation Manual

OL-V552 Installation Guide
10 Point Touch Overlay for the V552
1.0
Contents
Guide Purpose
Notes and Warnings
Equipment
Dimensional Drawings
Integration Procedures
2.0
Purpose
2.1
This procedure describes the steps to install the OL-V552 IR Touch Overlay onto the V552 display
3.0
Notes and Warnings
3.1
The overlay contains tempered glass. Use caution when handling.
3.2
The overlay has an integrated USB cable located in the bottom right corner. Ensure the cable is not
pinched, crushed, or damaged during installation.
3.3
Installation requires two persons at all times to ensure the touch screen frame does not bend or torque.
3.4
Once the touch screen is installed, do not lift the monitor by grasping or holding the touch screen
overlay.
3.5
Contact NEC Display Solutions support if you have any questions or require additional installation
guidance support.
500 Park Boulevard, Suite 1100
Itasca, IL 60143
Phone: (800) 632-4662
www.necdisplay.com
NEC Display Solutions of America, Inc.
OL-V552
Rev 1.0
Page 1
Page 1
Page 2
Page 2
Page 3
1