Changing/Disabling Programme Positions - Sony EZ77NZ Operating Instructions Manual

Changing/
disabling
programme
positions
After setting the channels and G-CODE
guide channels, you can change the
programme positions as you like. If any
programme positions are unused or
contain unwanted channels, you can
disable them.
Before you start...
• Turn on the VCR and the TV.
• Set the TV to the video channel.
Changing programme positions
e.g. Moving the programme position from 2 to 0.
1
MENU
PLAY
OK
2
PLAY
OK
26
Getting Started
Press MENU, then press M/m to move the
cursor (B) to SET UP CH AND
G-CODE and press OK.
Press M/m to move the cursor (B) to the
row on which you want to change the
programme position, then press ,.
To display other pages for programme
positions 5 to 49 (SLV-EZ77AS/EZ66AZ—
When COUNTRY is set to AUS) or 6 to 50
(SLV-EZ77NZ/EZ66AZ— When
COUNTRY is set to NZ), press M/m
repeatedly.
MENU
OK
M/m/</,
e.g. SLV-EZ77AS/EZ66AZ
(COUNTRY is set to AUS)
SET UP CH AND G-CODE
GUIDE
PROG CH
0 2 2
–
1 7 7
–
2 9 9
–
3 10 10
–
4
28 28
–
SELECT : [ ]
MOVE PROG : [ ]
ERASE PROG : [ CLEAR ]
SET UP CH AND G-CODE
PROG CH GUIDE
0 2 2
–
1 7 7
–
[
2 9 9 ]
–
3 10 10
–
4
28 28
–
SELECT : [ ]
SET GUIDE CH : [ ]
CONFIRM : [ ]
CH
CH