Advertisement
Quick Links
Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP LD4730Ga Signage Display
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
Main Board*1, Audio Board*1, Keypad Board*1,
Color Engine Board*1, Power Board*1
All types including standard alkaline and lithium coin
or button style batteries 3A 1.5V LR03(GD)
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps 47" Panel*1
Power board
DP cable*1, VGA cable*1, Audio cable*1, IR
cable*1, Power cord*1
All are inside monitor carton box
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
5
2
0
1
0
0
14
5
0
0
0
0
Page 1
Advertisement
Related Manuals for HP LD4730Ga
Summary of Contents for HP LD4730Ga
- Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
- Page 2 PCBs. Use tool to separate wall mount plate from rear cover, and separate HP LOGO, button and lens form bezel. Use tool to disassemble column rear cover from column, then release the screws to separate hinge from column, and release screws to separate hinge top bracket from hinge.
- Page 3 picture Operation Tool Disassemble bezel and Screw-driver Glass rear with M3 screw*14 & M4 screw*16 M3=5+1Kg Tear off mylar*5 on bezel Tear off rubber on panel. Disassemble housing & Screw-driver handles with M4 screw*14,M8 screw*8 M3=5+1Kg M4=8+1Kg Tear off gasket *3 and black mylar*1 on housing Disassemble IO port with Screw-driver...
- Page 4 Disassemble main board, Screw-driver audio board, color engine board and power board M3=5+1Kg with M3 screw*20. Tear off thermal pad(back side)*2 & tape(front side)*1 on main board Tear off black mylar & Screw-driver disassemble AC M4=8+1Kg cable on chassis with M4 screw*1 Disassemble chassis with M3 screw*10...
- Page 5 Disassemble key board & Screw-driver transfer board & IR board on IO BKT with M3 M3=5+1Kg screw*7 Tear off button on IO BKT Disassembly Side BKT*2 Screw-driver with M4 screw*20 M4=8+1Kg Disassembly handle Screw-driver BKT*2 with M4 screw*8 & M3 screw*3 M3=5+1Kg M4=8+1Kg Tear off cable and gasket...