Problem Solving Guide - Miele H 2265-1 E Operating And Installation Instructions

With the help of the following guide, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be remedied
without contacting Miele. This will save you time and money because you won't
need a service call.
Please note that a call-out charge will be applied to unnecessary service visits
where the problem could have been rectified as described in these operating
instructions.
Problem
The display is dark.
The oven does not heat
up.
 is flashing in the
display.
 appears
unexpectedly in the
display and  is
flashing at the same
time. The buzzer might
also be sounding.
  appears in the
display.
The signal tone does
not sound.
Possible cause and remedy
There is no power to the oven.
 Check whether the mains circuit breaker has
tripped. If it has, contact a qualified electrician or
Miele.
The system lock  has been switched on.
 Switch off the system lock (see "Clock/Timer -
Changing settings").
There is no power to the oven.
 Check if the circuit breaker has tripped. If it has,
contact a qualified electrician or Miele.
There has been a power cut.
 Reset the time of day (see "Using for the first
time").
Cooking times will also need to be reset.
The oven has been operating for an unusually long
time and this has activated the safety switch-off
function.
 Turn the function selector to 0. The oven is now
ready to use again immediately.
A fault has occurred that you cannot resolve.
 Call Miele.
Signal tones are switched off.
 Switch on the signal tones (see "Clock/Timer -
Changing settings").

Problem solving guide

79