Sw Download - Panasonic 1735 Technical Description

Panasonic Electric Works Nordic AB
MEW01295 Rev: 2
11.2
Technical Description Alert Annunciation Units 1735 & 1736, ver. 1.4.x
5 The AA unit will restart (Restarting....), i.e. the buzzer will
sound for approx. two seconds and the unit will return to
normal operation.
6 Cont. from 3 above: Or press black push button ("P1") and
the SSD will be erased (Erasing SSD....). The AA unit will
restart (Restarting....), i.e. the buzzer will sound for approx.
two seconds and the unit will return to normal operation.

SW download

Each AA unit is equipped with an RS232 interface ("J2"), which
makes it possible to connect a PC and carry out the downloading
directly in the AA unit respectively.
1. Prepare the PC and start Win512 / Win128 / Win512 G3. In
Win512 G3 select the AAU icon and click the right mouse
button. In win128 and Win512 G3, in menu "Tools" select
"Download FBP / EPU / AAU Software".
"Download program" and select the SW file to be
downloaded, i.e. DU_version.BIN (where "version" is the
valid program version, e.g. 14x=program version 1.4.x).
Check / set the port and baud rate. See also the Win512 /
Win128 / Win512 G3 help.
2. Connect the PC to the AA unit ("J2").
3. Put the jumpers "JP3" and "JP4" in position "A".
4. Put the jumper "JP2" (BOOT) in position.
5. Put the AA unit in "bootstrap" mode, i.e. put the jumper "JP1"
(RESET) in position momentarily. The buzzer will sound.
6. Start the downloading. (The buzzer will be silenced.)
7. When the download is ready remove the jumper "JP2" (BOOT).
8. Put the jumpers "JP3" and "JP4" in position "B".
9. Do a restart, i.e. put the jumper "JP1" (RESET) in position
momentarily.
seconds and the AA unit will return to normal operation.
10. Regarding fault messages, see chapter "Restart", page 23.
The buzzer will sound for approx. two
28
Select