Control Settings Menu - NEC E657Q User Manual

Standard Display regular quality
HDMI format such as 4K 30Hz
or FHD HDMI contents from
source devices with HDCP 1.4.
Professional Display high
quality HDMI format such as 4K
60Hz and HDR contents from
source devices with HDCP 2.2.
14. System Info
Indicate the display information.
15. Reset AV & Setup
Reset all Audio, Video, and
Setup settings to the factory
values settings.
(Except for Network Settings)

Control Settings Menu

HDMI 1
Control Settings
Control Interface
Network Settings
Monitor ID
MOVE
1. Control Interface
Select the control terminal.
LAN: Control is performed via
the network (LAN) terminal.
RS-232C: Control is performed
via RS-232C.
LAN and RS-232 cannot be
used at the same time.
2. Network Settings
Configure the network settings
of the monitor.
[DHCP]
ON: The network settings are
obtained from the DHCP server
on the network.
Manual DNS: The network
settings are obtained from the
DHCP server on the network,
but the DNS is set manually.
OFF: Configure fixed network
settings.
[IP ADDRESS] Set the IP
address for the monitor
connected to the network.
[SUBNET MASK] Set the
subnet mask for the monitor
connected to the network.
[DEFAULT GATEWAY] Set the
default gateway for the monitor
connected to the network.
[DNS PRIMARY] Set the
address of the primary DNS
server.
[DNS SECONDARY] Set the
address of the secondary DNS
server.
English-36
LAN
RS-232C
SELECT RETURN EXIT