Pioneer CX-3250 Service Manual page 96

1
Select Storage Screen
Select the program should be written from SD card or USB memory.
A
Instruct the start of program writing.
[Writing of navigation program]
B
4. SELF CHECK PROGRAM
C
The connection status of function module installed in the product is displayed.
In the case of non-connection, error is displayed and the target module is considered to be fault.
D
Diagnostic Target
Target Unit
E
1 System uCom
2 Mecha uCom
3 NAND Flash
4 GPS RF Unit
5 iPod Authentication Chip Confirm connection status
6 Bluetooth Unit
7 HD-Radio
* HD-Radio becomes always ERROR for the model on which is it not mounted.
F
96
1
2
Check Content
Confirm connection status
Confirm connection status
Confirm connection status
Confirm connection status
Confirm communication
setup status
Confirm connection status
AVIC-X930BT/XNUC
2
3
Required Time for Indication
Diagnosis when OK
Less than 1 second Connected
Less than 1 second Connected
Less than 1 second Connected
Less than 1 second Connected
Less than 1 second Connected
Approx. 60 seconds, Connected
max.
Less than 1 second Connected
3
4
Indication
when NG
!!ERROR!!
!!ERROR!!
!!ERROR!!
!!ERROR!!
!!ERROR!!
!!ERROR!!
!!ERROR!!
4