Use
The device is used to control the room temperature in heating systems.
Typical applications:
Homes
Residential buildings
Schools
Offices
The device is used together with the following equipment:
Thermal valves or zone valves
Combi boilers
Gas or oil burners
Pumps
Functions
Temperature control
RDJ100 offers both 2-position and PID intelligent learning temperature control, configurable
via parameter P01 (control behaviour).
2-position control algorithm to switch on and off the heating system within a switching
differential (SD) as per the difference between setpoint setting and measured room
temperature.
PID intelligent learning control algorithm periodically switches on and off the heating system.
The period time (T) and pulse length (P) of the control signal (PWM) are determined by the
setpoint and the measured room temperature.
In general, PID control provides more comfort and is more energy efficient than 2-position
control.
2
Siemens
Building Technologies
Datasheet
A6V10954415_en--_e
2018-11-20