Panasonic CZ-64ESMC3 Installation Instructions Manual page 22

Test Operation
 Group
3
Select the operation target.
Press ◄ ► to select the zone. →
4
▲ ▼ →
5
Finish the test operation.
Perform step 1 and 2, and then select [OFF] in step 4. ([TEST] display
disappears.)
Attention
 Do not use this mode for purposes other than the test operation. (To prevent
overload of the units)
 Read the installation instructions supplied with the units.
 Any of the Heat, Cool and Fan operations can only be performed.
 Temperature cannot be changed.
 Outdoor units do not operate for approx. 3 minutes after the power is turned
on or operation is stopped.
▲ ▼ →
(Press
22
(EN)
→ to fi nish.)
(continued)
Displays the
selected
setting
target.