Copyright; Before Initial Use; Initial Use; Inserting The Batteries/Filling The Mill - Silvercrest SMH 6 A1 Operating Instructions And Safety Instructions

 No foreign bodies should penetrate into the device.
 The mill must not come into contact with hot surfaces.
 The mill must be filled with peppercorns and coarse salt only.
 Keep the mill clean.

5. Copyright

All contents of these operating instructions are subject to copyright law and are provided to the
user solely as a source of information. Any form of copying or reproduction of data and information
without the express written permission of the author is prohibited. This also concerns commercial use
of the content and data. The text and illustrations correspond to the technical standards at the time
of printing. Subject to alterations.

6. Before initial use

Remove the SMAS 6 A1 mill and all accessories from the packaging and check the completeness
of the delivery. Keep the packaging material away from children and dispose of it in an
environmentally-friendly manner.

7. Initial use

7.1 Inserting the batteries/filling the mill


Hold the container (6) firmly and turn the top section (1) anti-clockwise until the arrow on the
top section (1) is lined up with the

Remove the top section (1) from the container (6).

Remove the motor (3) from the container (6).

Insert the batteries with the correct polarity (note the + and - signs). The polarity is marked on
the batteries and on the battery compartment.

Fill the container (6) with peppercorns or coarse salt. Fill the container (6) up no higher than
the padlock icons

Place the motor (3) onto the container (6). Make sure that the contacts (4) of the motor (3) are
positioned on the contacts (5) of the container (6).

Place the top section (1) onto the container (6).

Hold the container (6) firmly and turn the top section (1) clockwise until the arrow on the top
section (1) is lined up with the

7.2 Using the mill


Remove the protective cap (7) on the bottom of the container (6).

Keep the button (2) pressed to activate the mill. The light (8) lights up during operation.

Replace the protective cap (7) onto the bottom of the container (6) after use.
icon on the container (6).
and .
icon on the container (6).
SilverCrest SMH 6 A1
English - 7