Scrambler Code; Home Repeater; Area Code; Repeater Information Table - Kenwood TK-3180 Function Reference

17.2.14 Scrambler Code

Configuring the Scrambler Code.
You can configure the Scrambler Code using KPG-89D.
(Refer to 29 Voice Scrambler.)
There are 2 types of Scrambler function: uilt-in and
optional Voice Scrambler Board . You can configure the
Scrambler code for the Scrambler function using the
optional Voice Scrambler board.
!
Configuration using KPG-89D
•
Configuring the Scrambler Code (Refer to FPRG
6.6.17 Scrambler Code.)

17.3 Home Repeater

You can configure the following functions to the LTR
Trunking System using KPG-89D.
•

Area Code

• Home Repeater
•

Repeater Information Table

17.3.1 Area Code
This function prevents interference from adjacent
systems. The Area Code is normally configured to "0".
When the transceiver suffers from interference, configure
the Area Code of one system to 0 and the adjacent
system to 1.
You can configure the Area Code using KPG-89D.
!
Configuration using KPG-89D
• Configuring the Area Code (Refer to FPRG 6.4.1
Area Code.)
17.3.2 Home Repeater
The Home Repeater is used to receive various
information from the LTR Trunking system. The
transceiver automatically responds to the repeater such
as transmitting/receiving data, and Trunkout via this
repeater.
You can also transmit/receive using the Home Repeater
when the Home Repeater is available.
The Home Repeater provides the Repeater Number to
the user while other parties use the Home Repeater. The
receiving party's transceiver moves to the Trunkout
Repeater to receive.
You can configure the Home Repeater using KPG-89D.
Version: 1.11
!
Configuration using KPG-89D
•
Configuring the Home Repeater (Refer to FPRG
6.4.2 Home Repeater.)
17.3.3 Repeater Information Table
In LTR Trunking system, the transceiver communicates
via a repeater.
You can configure a maximum of 20
information to the Repeater Information Table for each
Zone.
You can configure the following functions for the Repeater
Table Information using KPG-89D.
Table 17-2 Repeater Information Table Configuration
Receive Frequency
Transmit Frequency
Beat Shift
Telephone
!
Configuration using KPG-89D
•
Configuring the Receive Frequency (Refer to
FPRG 6.4.3 Receive Frequency.)
• Configuring the Transmit Frequency (Refer to
FPRG 6.4.4 Transmit Frequency.)
• Configuring the Beat Shift function (Refer to FPRG
6.4.5 Beat Shift.)
• Configuring the Telephone function (Refer to
FPRG 6.4.6 Telephone.)
Function Reference
17 LTR TRUNKING
Repeaters'
Operation
Configure the receive frequency.
Configure the transmit frequency.
Configure the Beat Shift function.
(Refer to 1.8 Beat Shift.)
Configure the repeater to be used as
the RIC (Repeater Inter Connect).
63