Cable Connection; Connecting Cables To The Top Air-Flow Cabinet Used For A Single-Cabinet Ups - Huawei UPS5000 User Manual

Top air-flow cabinet

Hide thumbs Also See for UPS5000:

Table of Contents

UPS5000-(200 kVA-800 kVA) Top Air-flow Cabinet

User Manual

Figure 3-14 Installing anchor baffle plates

Step 12 (For a dual-cabinet UPS, optional) If the UPS is installed against a wall, reinstall the rear

covers for the top air-flow cabinets, remove the left and right side panels from the top air-flow

cabinets, and put the side panels away, as shown in

Step 13 (For a dual-cabinet UPS, optional) If the UPS is installed against a wall, move the UPS

cabinets combined with the top air-flow cabinets to the installation position. If the antiseismic

kit is configured for the UPS, secure the antiseismic kit to the ground from the side of the top

air-flow cabinet.

Step 14 Install bottom plates. For details, see

for a Single-Cabinet

----End

3.4 Cable Connection

3.4.1 Connecting Cables to the Top Air-flow Cabinet Used for a

Single-Cabinet UPS

Step 1 Remove the cable trough cover and fan interconnection terminal protective cover, and put

them away.

Issue Draft A (2016-12-09)

Step 9

UPS.

Huawei Proprietary and Confidential

Figure

3-11.

3.3.1 Securing the Top Air-flow Cabinet Used

3 Product Installation

Table of Contents